Cable Tray

Fivestar Industries, a dependable Cable Tray Manufacturer and Exporter, presents cable trays of three kinds viz. Inside Return Flange, Outside Return Flange and Plane Flange. The width and length of our Ladder Cable Tray varies From 50 to 900mm and 2.44, 2.90 & 3.00 Meter respectively. We also offer Perforated Cable Tray which gives flawless performance during its lifespan. The raw materials used by use are Steel Sheet (Mill Galvanized Material) and Zinc Plated Pre - Galvanized to B.S. 2989. We do Fabrication (HDGAF) in standards only.

ACCESSORIES

• 100 mm 90 deg. Horizontal Bend
• 100 mm 90 deg. Horizontal Tee
• 100 mm 90 deg. Horizontal Cross
• 100 mm 90 deg. Inside Riser
• 100 mm 90 deg. Outside Riser

CABLE TRUNKING – RACE WAY
Other Range in Cable Trunking - Quick Fix, Self Locking, Screw Fix, Multi Compartment, Accesories Offset & Misc. Fittings.

Cable Trunking are manufactured to BS4678 part 1 class 3 from pre galvanized steel to BS2989 Standard Length is 2.44 & 3.00 meter however 2.00 meter length is also provided on customers requirement in different colour specifications of Powder Coat. Trunking Is Supplied With Self Locking Cover & Accessories.

Width : From 50 to 300mm.
Length : 2.44, 2.90 & 3.00 Meter.
Side Heights : 50, 75, 100, 150, 200, 225 & 300 mm.
Flange Width : 12 mm.
Finisher : Pre Galvanized to BS 2989, Hot Dip Galvanized after Fabrication to BS 729 Epoxy Coating / Powder Coating.

There are two type of Cable Trunkings / Raceways
Standard Trunking / Raceways
Standard trunking is made with single compartment.

Multi Compartment Trunking / Raceways.
Multi Compartment Trunking is made with 2 & 3 compartment based on standard size. The Compartment of G.K. NASA Multi Compartment is made of equal standard size unless otherwise demanded by the customers, Partitions are spot welded / Revated into position to produce necessary compartments.


CABLE TRUNKING
Quick Fix Cable Trunking
A quick fix trunking are supplied along with quick release cable trunking which only require a quarter turn to provide an efficient fastening and quick release.

Trunking Size Width x Depth in mm :
Thickness 1.0 mm : 50 x 50
Thickness 1.2 mm : 75 x 50, 75 x 75, 100 x 50, 100 x 75, 100 x 100
Thickness 1.5 mm : 150 x 50, 150 x 75, 150 x 100, 150 x 150,200 x 100, 225 x 50, 225 x 75, 225 x 100, 225 x 150, 225 x 225, 300 x 50, 300 x 75, 300 x 100,300 x 150, 300 x 300

CABLE LADDERS :
Other Range in Cable Ladders - Light Duty, Medium Duty, Heavy Duty, Type of Flanges Inside Flange Fittings, Outside Flange Fittings.

G.K. NASA Cable Ladders have heavy duty construction and all the components are welded for rigidity and strength. The cable ladders are available in three verities. Light Duty Cable Ladder, Medium Duty Cable Ladder, Heavy Duty Cable Ladder & also available in Extra Heavy Duty Cable Ladder.

General Information
Raw Material : Steel Sheet (Mill Galvanized Material), Zinc Plated Pre - Galvanized to B.S. 2989.
Hot Dip Galvanizes After : MILD Steel to ASTM A 123, BS 729 & DIN50796.
Fabrication (HDGAF) : Standards.
Stainless Steel : AISI 304, 316 (Mattine Grade).
Aluminum : Aluminium Alloy 6063.
Deep Galvanized : Deep Hot Dip Galvanized (HDGAF, Tgwice usual Zinc Thickness).
Epoxy Polyester Coating : Epoxy Polyester Coating on mild Steel in R.A.L. Colour (This paint finish provide non flammable coating and hard adherent).
Standard Length of Ladder : 2440, 2900 & 3000 mm.

Types of Cable Ladders

• NLLR TYPE - Light Duty Cable Ladders with Square Rivited Rungs.
• NMLU TYPE - Medium Duty Cable Ladders with U-Type Rungs.
• NHLS TYPE - Heavy Duty Cable Ladders with Square Tubular Rungs.

Side Height

Light Duty : 50 mm.

Medium Duty : 100, 125, 150 & 175 mm.

Heavy Duty : 100, 125. 150 & 175 mm.

CABLE LADDERS HEAVY DUTY
Width : From 50 to 1000mm
Length : 2.44 & 3.00 Meter
Flange Width : 15, 20, 32, & 38mm
Side Heights : 50, 75, 100, 125, 150 & 175 mm
Rung Spacing : 250 mm
Finisher : Pre Galvanized to BS 2989, Hot Dip Galvanized after Fabrication to BS 729 Epoxy Coating / Polyester Powder Coating.

CABLE LADDERS INSIDE FLANGE FITTINGS

90 deg. Horizontal Bend

Horizontal Tee

Horizontal Cross

90 deg. Inside Riser

90 deg. Outside Riser

To enquire about the desired product(s), just check the box and then click “Enquiry Now” button which is provided below.